ROTOVIBE®
The Rotovibe is a chorus/vibrato effect that can
simulate rotating speaker sounds popularized by Hendrix and many
others. This is a very expressive effect, thanks
to its built-in real-time control. Choose either
Chorus or Vibrato, adjust the intensity of the
effect,
and then control the effect’s speed by rocking the
pedal back and forth. A mainstay on Zakk Wylde's
pedalboard.
Power: Single
9v battery or Dunlop ECB-003 AC Adapter
Controls: Pedal
controls rate of speed for selected
mode, whether vibrato or chorus . Effect on/bypass
toggle switch at bottom of pedal travel .Chorus
or Vibrato effect mode switch, mounted onside . Adjustable knob
control of modulation intensity (depth of effect), mounted on side .
Red LED indicates vibrato; green LED indicates chorus
. LEDs pulse to indicate speed rate of effect
DUN-JD-4S
|
FUZZ FACE DISTORTION
The original Fuzz Face is constructed to the
vintage specs, with the original Germanium PNP transistor design.
This is the classic fuzz box used by Jimi
Hendrix, Eric Johnson, and more.
Power: Single
9-volt battery or Dunlop ECB201
AC “Jump”
Adapter
Controls: Footswitch
toggles effect on/bypass .
Volume knob controls total output gain. Fuzz knob
controls intensity of fuzz tone
DUN-JD-F2
|
UNI-VIBE® STEREO CHORUS
The Uni-Vibe Stereo Chorus was inspired by the
original
classic Uni-Vibe that gave a psychedelic sheen to
tracks by Hendrix, Trower, and others—but this pedal takes things up a
notch with its stereo capabilities. All the airy, phasey, rotating speaker
sounds that made the Uni-Vibe famous in a compact, affordable, stereo
pedal.
Power: Single
9v battery or Dunlop ECB-003 AC Adapter
Controls: Footswitch
toggles effect on/bypass (red LED indicates on, pulsates with effect
speed). Mix knob varies chorus effect from Wide (maximum stereo
effect) to Mono. Speed knob controls rate of modulation . Intensity
knob adjusts depth of effect . Dual output jacks
for left/right stereo processing
DUN-UV-1SC
|
UNI-VIBE® FOOT CONTROL
This pedal lets you control the Speed and On/Off
functions of the UV-1 with your foot, allowingy
ou to tweak the Chorus or Vibrato effects in real
time for powerful expression. Uses heavy-duty die-cast zinc housing,
high-quality connectors, and a 10-million cycle, industrialgrade microswitch
for silent, reliable operation.
Power: Needs
no batteries nor external power source
Controls: Heel
pedal position sets the Uni-Vibe to
bypass (no effect) Moving the pedal toward the toe
position modulates the Speed function of the Uni-
Vibe, with speed increasing as the pedal is pressed
down
DUN-UV-1FC
|
UNI-VIBE® ROTATING SPEAKER EFFECT
The UV-1, Dunlop’s faithful recreation of this
legendary psychedelic effect, delivers that swirling, spacey “Bridge
of Sighs” tone, plus a lot more. The Chorus mode sounds
thick, phasey, and much like a rotating speaker. The
Vibrato mode modulates the pitch of the played note, delivering a cool,
quivering texture to your sound. The UV-1 sports hand-matched
photoresistors, a long-life incandescent lamp, and custom light
shielding to protect
sonic integrity.
Power: Dunlop
ECB-004 18-volt AC Adapter
Controls: Footswitch toggles
effect on/bypass (red LED indicates on). Footswitch toggles Chorus
(rotating speaker, green LED) or Vibrato (pitch modulation, red
LED) effects . Speed knob controls rateof
modulation . Volume knob adjusts output gain . Intensity knob adjusts
depth of effect
|
|
